Skip to main content

Worker performance

Note: All metrics in this article are prepended with the “temporal_” prefix. The prefix is omitted in this article to make the names more descriptive.

Metrics

Performance tuning involves three important SDK metric groups:

  1. worker_task_slots_available gauges tagged worker_type=WorkflowWorker and worker_type=ActivityWorker for Workflow Task and Activity Workers correspondingly. These gauges report how many executor “slots” are currently available (unoccupied) for each Worker type.
  2. workflow_task_schedule_to_start_latency and activity_schedule_to_start_latency timers for Workflow Tasks and Activities correspondingly. For more information about schedule_to_start timeout and latency, see Schedule-To-Start Timeout.
  3. sticky_cache_size and workflow_active_thread_count report the size of the Workflow cache and the number of cached Workflow threads.

Note: To have access to all the metrics mentioned above in the JavaSDK, version ≥ 1.8.0 is required.

Configuration

The following options are defined on WorkerOptions and are applicable for each Worker separately:

  1. maxConcurrentWorkflowTaskExecutionSize and maxConcurrentActivityExecutionSize define the number of total available slots for that Worker.
  2. maxConcurrentWorkflowTaskPollers (JavaSDK: workflowPollThreadCount) and maxConcurrentActivityTaskPollers (JavaSDK: activityPollThreadCount) define the number of pollers performing poll requests waiting on Workflow / Activity task queue and delivering the tasks to the executors.

The Workflow Cache is created and shared between all the workers. It's designed to limit the amount of resources used by the cache for the whole host/process. So the options are defined on WorkerFactoryOptions in JavaSDK and in worker package in GoSDK:

  1. WorkerFactoryOptions#workflowCacheSize (GoSDK: worker.setStickyWorkflowCacheSize) defines the maximum number of cached Workflows Executions. Each cached Workflow contains at least one Workflow thread and its resources (memory, etc).
  2. maxWorkflowThreadCount defines the maximum number of Workflow threads.

These options limit the resource consumption of the in-memory Workflow cache. Workflow cache options are shared between all Workers, because the Workflow cache is something that has to do with the resource consumption of the whole host, like memory and the total amount of threads, and should be limited per JVM.

Monitor Task Queue backlog metrics

A Task Queue is a lightweight, dynamically allocated queue. Worker Entities poll the queue for Tasks. The Temporal Service dynamically creates different Task Queue types including Activity Task Queues, Workflow Task Queues, and Nexus Task Queues. These Task Queue types route their Tasks to Workers for Task completion.

With an accurate estimate of backlog Tasks, you can determine the optimal number of Workers to deploy. Balance your Worker count with the number of Tasks to achieve the best performance. This approach minimizes Task backlog saturation and reduces idle Workers.

Task Queue metrics provide numerical insights into your Task Queue activity and backlog characteristics. Use these metrics to tune your production deployments. Evaluate your Worker loads and assess whether you need to scale up or reduce your Worker deployment.

Task Queue types

For each Task Queue name, Temporal creates separate queues for each Task Queue type, namely:

  • Activity Task Queue: A queue that holds Activity Tasks. Activity Tasks represent units of work within a larger business process. Each Activity Task contains the context required by an Activity Definition. Workers poll Activity Tasks from the Activity Task Queue and use them to initiate Activity Executions.
  • Workflow Task Queue: A queue that holds Workflow Tasks. Workflow Tasks contain the context needed by a Workflow Definition. Workers poll Workflow Tasks from the Workflow Task Queue and use them to initiate Workflow Executions.
  • Nexus Task Queue (Public Preview): A queue that holds Nexus Tasks. Nexus Tasks are used for units of work passed between Namespaces. Workers configured with the Nexus Service poll the Nexus Task Queue for available tasks and handle them by initiating Workflow Executions in the target Namespace. Each Nexus Task contains the context required by the target Workflow Definition.

Each Task Queue type provides unaggregated metrics.

Task Queue metrics

The Temporal Service reports information separately for each Task Queue type (not aggregated). Use the following metrics to retrieve detailed information about Task Queue health and performance. Available metrics include:

ApproximateBacklogCount

Represents the approximate count of Tasks currently backlogged in this Task Queue. The number may include expired Tasks as well as active Tasks, but it will eventually converge to the correct count over time.

You can rely on this count when making scaling decisions.

Metric Accuracy

Workflow Task Queue types provide partial information due to performance optimizations. Tasks sent to Sticky queues are not included in the returned values for this metric. Since Tasks remain valid for only a few seconds in Sticky Queues, this inaccuracy diminishes over time, especially as the backlog grows.

ApproximateBacklogAge

Returns the approximate age of the oldest Task in the backlog. The age is based on the creation time of the Task at the head of the queue.

You can rely on this count when making scaling decisions.

Metric Accuracy

Workflow Task Queue types provide partial information due to performance optimizations. Tasks sent to Sticky queues are not included in the returned values. Since Tasks remain valid for only a few seconds in Sticky Queues, this inaccuracy diminishes over time, especially when the backlog is older than a few seconds.

TasksAddRate and TasksDispatchRate

Reports the approximate Tasks-per-second added to or dispatched from a Task Queue. This rate is averaged over the most recent 30-second time interval. The calculations include Tasks that were added to or dispatched from the backlog as well as Tasks that were immediately dispatched and bypassed the backlog (sync-matched).

Metric Accuracy

The actual Task delivery count may be significantly higher than the number reported by these metrics:

  • Eager dispatch refers to a Temporal feature where Activities can be requested by an SDK using one Workflow Task completion response. Tasks using Eager dispatch do not pass through Task Queues.
  • A Sticky Task Queue is associated with a dedicated Worker instance. Tasks passed to Sticky Task Queues are not accounted for by these metrics. Normally, only the first Workflow Task of each Workflow is placed on a Workflow Task Queue. Subsequent Tasks are passed to the Sticky Task Queue for performance improvement.

BacklogIncreaseRate

Approximates the net Tasks per second added to the backlog, averaged over the most recent 30 seconds. This is calculated as:

TasksAddRate - TasksDispatchRate
  • Positive values of X indicate the backlog is growing by about X Tasks per second.
  • Negative values of X indicate the backlog is shrinking by about X Tasks per second.
Metric Accuracy

While individual add and dispatch rates may be inaccurate due to Eager and Sticky Task Queues, the BacklogIncreaseRate reliably reflects the rate at which the backlog is shrinking or growing for backlogs older than a few seconds.

Fetch Worker metrics

The Temporal CLI helps you monitor and evaluate Worker performance. Issue the following command to display a list of active Workers that have recently polled a Task Queue:

temporal task-queue describe \
--task-queue YourTaskQueueName \
[additional options]

This command retrieves poller information, backlog statistics, and task reachability for Task types (available in Temporal Server v1.25.0, Temporal CLI 1.1 and later).

danger

Task reachability status is experimental. Determining Task reachability incurs a non-trivial computing cost. This feature may significantly change or be removed in a future release.

Evaluate Worker availability and capacity issues

Each Temporal Server records the last time of each poll request. This time is displayed in the temporal task-queue describe output.

  • A LastAccessTime value exceeding one minute may indicate that the Worker fleet is at capacity or that Workers have shut down or been removed.

  • Values under 5 minutes typically suggest the Worker fleet is at capacity. "At capacity" means that all Workflow and Activity slots are full.

  • Values over 5 minutes since the last poll request usually suggest that Workers have shut down or been removed. Workers are removed if 5 minutes have passed since the last poll request.

Manage your Worker fleet

You can adjust the number of Workers to enhance Workflow Execution performance and manage your fleet size. For instance, a large backlog of Tasks with too few Workers will slow down Workflow Execution completions and decrease processing efficiency. Adding more Workers boosts speeds up completion rates and improves throughput. An empty backlog indicates low Worker utilization, allowing you to reduce your fleet and associated costs.

The metric values provided by temporal task-queue describe can help you manage your Worker fleet deployment:

  • ApproximateBacklogAge shows how long Tasks have been waiting to be dispatched. If this time grows too long, more Workers can boost Workflow efficiency.

  • Calculate the demand per Worker by dividing the number of backlogged Tasks (ApproximateBacklogCount) by the number of Workers. Determine if your task processing rate is within an acceptable range for you needs using the per-Worker demand (how many Tasks each Worker has yet to process), the backlog consumption rate (TasksDispatchRate, the rate at which Workers are processing Tasks), and the dispatch latency (ApproximateBacklogAge, the time the oldest Task has been waiting to be assigned to a Worker).

  • The backlog increase rate (BacklogIncreaseRate) shows the changing demand on your Workers over time. As this rate increases, you may need to add more Workers until demand and capacity are balanced. As it decreases, you may be able to reduce your Worker fleet.

Task Queue processing tuning

The following steps limit delays in Task Queue processing due to insufficient or unbalanced Workers. Review these steps if you notice high schedule_to_start metrics.

The steps are arranged in the recommended order of execution.

Hosts and Resources provisioning

If currently provisioned Worker hosts are fully utilized (near full CPU usage, high load average, etc), additional Workers hosts have to be provisioned to increase the capacity of the Workers pool.

It's possible to have too many Workers

Monitor the poll success (poll_success/poll_success_sync) and poll timeout poll_timeouts Server metric counters.

Poll Success Rate = (poll_success + poll_success_sync) / (poll_success + poll_success_sync + poll_timeouts)

Poll Success Rate should be >90% in most cases of systems with a steady load. For high volume and low latency, try to target >95%.

If you see

  1. low Poll Success Rate, and
  2. low schedule_to_start_latency, and
  3. low Worker hosts resource utilization at the same time,

then you might have too many workers, consider sizing down.

Worker Executor Slots sizing

The main area to focus on when tuning is the number of Worker Executor Slots. Increase the maximum number of working slots by adjusting maxConcurrentWorkflowTaskExecutionSize or maxConcurrentActivityExecutionSize if both of the following conditions are met:

  1. The Worker hosts are underutilized (no bottlenecks on CPU, load average, etc.).
  2. The worker_task_slots_available metric from the corresponding Worker type frequently shows a depleted number of available Worker slots.

Poller count

note

Adjustments to pollers are rarely needed and rarely make a difference. Please consider this step only after adjusting Worker slots in the previous step. The only scenario in which the pollers' adjustment makes sense is when there is a significant network latency between the Workers and Temporal Server.

If:

  1. the schedule_to_start metric is abnormally long, and
  2. the Worker hosts are underutilized (there are no bottlenecks on CPU, load average, etc), and
  3. worker_task_slots_available metric from the corresponding Worker type shows that a significant percentage of Worker slots are available on a regular basis,

then consider increasing the number of pollers by adjusting maxConcurrentWorkflowTaskPollers or maxConcurrentActivityTaskPollers, depending on which type of schedule_to_start metric is elevated.

Rate Limiting

If, after adjusting the poller and executors count as specified earlier, you still observe an elevated schedule_to_start, underutilized Worker hosts, or high worker_task_slots_available, you might want to check the following:

  • If server-side rate limiting per Task Queue is set by WorkerOptions#maxTaskQueueActivitiesPerSecond, remove the limit or adjust the value up. (See Go and Java.)
  • If Worker-side rate limiting per Worker is set by WorkerOptions#maxWorkerActivitiesPerSecond, remove the limit. (See Go, TypeScript, and Java.)

Workflow Cache Tuning

When the number of cached Workflow Executions reported by sticky_cache_size hits workflowCacheSize or the number of their threads reported by workflow_active_thread_count metrics gauge hits maxWorkflowThreadCount, Workflow Executions start to get evicted from the cache. An evicted Workflow Execution will need to be replayed when it gets any action that may advance it.

If

  1. The Workflow Cache limits described above are hit, and
  2. Worker hosts have enough free RAM and are not close to reasonable thread limits,

workflowCacheSize and maxWorkflowThreadCount limits may be increased to decrease the overall latency and cost of the replays in the system. If the opposite occurs, consider decreasing the limits.

note

In CoreSDK based SDKs, like TypeScript, this metric works differently and should be monitored and adjusted on a per Worker and Task Queue basis.

Invariants

These properties should always be true for a Worker's configuration.

These are applicable to JavaSDK only.

Perform this sanity check after the adjustments to Worker settings.

  1. workflowCacheSize should be ≤ maxWorkflowThreadCount. Each Workflow has at least one Workflow thread.
  2. maxConcurrentWorkflowTaskExecutionSize should be ≤ maxWorkflowThreadCount. Having more Worker slots than the Workflow cache size will lead to resource contention/stealing between executors and unpredictable delays. It's recommended that maxWorkflowThreadCount be at least 2x of maxConcurrentWorkflowTaskExecutionSize.
  3. maxConcurrentWorkflowTaskPollers should be significantly ≤ maxConcurrentWorkflowTaskExecutionSize. And maxConcurrentActivityTaskPollers should be significantly ≤ maxConcurrentActivityExecutionSize. The number of pollers should always be lower than the number of executors.

Drawbacks of putting just "large values everywhere"

As with any multithreading system, specifying too large values without monitoring with the SDK and system metrics will lead to constant resource contention/stealing, which decreases the total throughput and increases latency jitter of the system.

Related